BQPBM - COSMOLUBRIC 684

  • MSDS: BQPBM
  • Manufacturer: E F HOUGHTON AND CO
  • Product Name: COSMOLUBRIC 684
  • National Stock Number: 6850-00N012207
Product Identification

Product ID:COSMOLUBRIC 684
MSDS Date:05/27/1988
FSC:6850
NIIN:00N012207
MSDS Number: BQPBM

Responsible Party
E F HOUGHTON & CO
MADISON AND VAN BUREN AVENUES
VALLEY FORGE, PA 19482
US

Emergency Phone: 215-666-0291

Info Phone: 215-666-4105

Preparer: DAVID H EADLINE

Cage: 73227

Contractor
HOUGHTON INTERNATIONAL INC
930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

Ingredients

LEAD DIAMYLDITHIOCARBAMATE.LD50 RAT ORAL >5 ML/KG.

CAS: 36501-84-5

Fraction By Weight: <1%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION.SKIN:PROLONGED CONTACT MAY BE
MILDLY IRRITATING.INGESTION/INHALATION:N/K .
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.CONSULT
PHYSICIAN.SKIN:WASH WITH SOAP AND WATER.INGESTION:CONTACT A
PHYSICIAN.INHALATION:REMOVE TO FRESH AIR.SUPPORT BREATHING (GIVE
02/ ARTIFICIAL RESPIR ATION) .MD NOTE:USE STOMACH PUMP IF INGESTED.

Fire Fighting

Flash Point Method:COC
Flash Point:420F,215.56C
Extinguishing Media:CARBON DIOXIDE,FOAM,DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:OXIDES
OF CARBON.

Accidental Release

Spill Release Procedures:APPLY DRY OIL ABSORBENT TYPE MATERIAL AND
SWEEP UP.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:AVOID CONTACT WITH STRONG
OXIDIZERS.AVOID EXCESSIVE SKIN CONTACT.AVOID INGESTION.
Other Precautions:SAME AS FOR HANDLING LUBRICANT OILS.

Exposure Controls

Respiratory Protection:NOT REQUIRED
Ventilation:MECHANICAL (GENERAL) ADEQUATE FOR GENERAL USE.
Protective Gloves:IMPERVIOUS IF SKIN IS SENSITIVE.
Eye Protection:SAFETY GOGGLES IF SPLASHING.
Other Protective Equipment:NOT REQUIRED
Work Hygienic Practices:STANDARD HYGIENIC WORK PRACTICES ARE
SATISFACTORY.
Supplemental Safety and Health
BOILING POINT:HIGH;WIDE RANGE.FIRE POINT: 450F,232.22C.PRODUCT CONTAINS
A SMALL AMOUNT OF LEAD SOAP.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:SEE SUPP
Decomp Temp:Decomp Text:N/K
Vapor Pres:NIL
Vapor Density:>1,AIR=1
Spec Gravity:0.915,WATER=1
Evaporation Rate & Reference:NIL
Solubility in Water:INSOLUBLE
Appearance and Odor:GREEN FLUID WITH A BLAND ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .MAY BE INCINERATED UNDER
CONTROLLED CONDITIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.